Taking the first steps to producing your book can seem daunting but that is exactly what our team of specialists are here to help you with. Whether you need guidance on choosing a cover finish, advice on the format of your book, or you don’t know what text paper would be most suitable, we will talk you through these complexities.
We want you to be confident with every decision that you make so the following information will introduce you to essential considerations, technical terms, and to our offerings focused on giving you the best advice and the best service, in order to provide you with a high quality finished product. We will be here to help guide you through every step of the production process.
Typesetting your manuscript
The manuscript is finished but what comes next? You want your book to be beautiful both inside and out to ensure that the reader never puts it down. If you were to look at two different books on your bookshelf you will notice that the inside text design is completely different; this is where a typesetter comes in. How do you decide on the format, the font, the type size, the layout? What is it that makes your book a pleasure to read? A great book can be compromised by poor textual design and if it is difficult to look at, it will be hard to read. In our opinion, unless you have experience in the relevant software we recommend having a professional typesetter carry out the textual design for you. Although we don’t offer in-house typesetting services, we can put you in touch with the right people to provide you with an excellent service.
It is often said that you shouldn’t judge a book by its cover, but your readers may do so. You want your book to target the right readers, you want it to be picked up by the right hands and therefore your cover, to a certain extent, needs to reflect your words. You want your book to stand out but what you dont want is a chick-lit style cover on a sci-fi novel. Having professional input on the cover design of your book will ensure that it is designed in such a way that makes it stand out within the right genre and for the right reasons. We can put you in touch with cover designers who can give you first-hand advice on the right cover design for you.
Trim sizes refer to the format of the finished book after it has been bound. Although we don’t want to drive the decisions that you make, we will give you guidance as to how to make commercial decisions about the design and format of your book. The most widely used of these formats is the B format paperback and is probably what your own bookshelf is full of. The format that you chose is closely linked to the retail price that you want to charge. For example, customers may be willing to spend more on a B format book than an A format book, and a Royal format book than a B format book.
We offer 4 standard trim sizes:
A Format: 178mm x 111mm
B Format: 198mm x 129mm
Demy: 216mm x 135mm
Royal: 234mm x 153mm
If you have had any previous experience with other suppliers you may have been offered imperial measurements different to those above. While we can produce books to various sizes there may be a more economical trim size available. We recommend that you choose industry standard sizing where possible however if you have any queries please contact us and we can discuss in more detail.
The extent refers to the number of pages in your book. It cannot be an odd number and extents are calculated in multiples of 16. If the extent of your book sits outside our standard extents we will round it up to the nearest multiple of 16 with your approval. For example, if your book had an extent of 200pp, we would round it up to 208pp and there would be 8 blank pages at the back of
Clays have a variety of both coated and uncoated papers, ranging in weight and brightness. Our standard book papers range from 52gsm (grams per square meter) to 80gsm and generally speaking, the heavier the paper, the better the quality but the more it costs. Higher grammage papers tend to be more opaque, and therefore there will be less showthrough of the ink on the reverse of the page that you are reading.
Different papers are suitable for different types of books and we can recommend the best paper for you. The physical properties of the paper will have a big impact on the weight and the bulk of the book, which may also affect the cost of carriage if you intend to distribute the books yourself. Furthermore it will determine the spine width that will in turn have an effect on the cover design.
Calculating spine width
The spine width is essential to the production of your book. The spine width also plays a key role in the cover design; if the spine width is too narrow then the design on the spine of the book will spread onto the front and back panels of your cover design. Likewise, if your spine width is too wide, then the design from the front and back panels of your cover could run on to the spine. We have created a spine width calculator to make this a straight forward calculation that you can do yourself.
We have both conventional and digital presses and depending on the specifications of your book, we will advise you as to what is the best printing method for you. Our conventional presses are used for long-run printing and we print short-run work on our digital presses.
We will always quote for the most cost effective method of production and this is dependent on the specification of your book. We pride ourselves on exceptional service and therefore we are always happy to discuss the options with you directly.
The most common binding style in book production is perfect binding. We do offer sewn binding but it is unlikely that your book will need to be section sewn. We offer both paperback and hardback binding and during the binding process for hardbacks we can also secure marker ribbons and head and tail bands which would add a great finishing touch to your book.
We have a large range of cover finishes that can be applied to your book and we will talk you through them to help you to decide the best option for you.
Varnish is a cost effective finish which offers overall protection and coating to the printed cover. It is clear and provides a gloss or matt finish.
Gloss Varnish - Gloss varnish is a lacquer that we can use to coat the cover. It protects against general wear and tear and gives a high gloss finish to your cover.
Matt Varnish – Matt varnish is the same process as gloss varnish but instead of being shiny, it provides a more subtle matt finish.
Lamination is a plastic film in various finishes which is applied to the entire printed sheet to create various effects.
Gloss Laminate – It is very high impact and hard wearing. It makes colours more vibrant and offers a high level of protection to books.
Matt Laminate – It gives a subtle and tactile finish to your cover. It doesn’t provide the same level of protection as gloss lamination but it is a more popular choice due to its smooth quality finish.
Soft Matt Laminate – Similar to matt laminate it has a premium feel and is extremely tactile, like rubber to touch.
Other Cover Finishes
Spot UV - this is where we apply gloss varnish to a localised and specific area of your cover, for example, the title or an image. It is particularly effective when used against a matt laminate cover finish due to the contrast of matt and high gloss.
Foil blocking - this is the process of applying a metallic foil to your cover and available in a range of colours. The process of foil blocking is done on a foil blocking machine where heat is used to stamp the foil onto the surface of the cover via a brass block.
Embossing - Pressure is applied to the cover board using a die to distort the surface and raise a specific area for greater emphasis or to create a textured effect.
De-bossing - De-bossing follows the same process as embossing but rather than raising an area it creates a hollow or dip.
All of these cover finishes do incur additional costs. The cost of making a block for foiling and/or embossing is quite high, so for runs of under 1000 copies we would suggest sticking to standard cover finishes such as varnish or laminate.
All of these cover finishes can be applied to both paperback and hardback jacketed books. There are additional choices that you can make about cover finishes if you decide to print a hardback book.
Cases can be covered with a wide range of materials but the following are the most commonly used and the most cost effective.
If you are unsure on cover finishes then we recommend our specially designed sample pack that contains examples of all of the cover finishes that have been described. Only then you will get a real understanding for how your finished book could look and feel.
Supplying files for print
Before submitting your files for print, you can go through the following check list.
Printed and bound in Great Britain by Clays Ltd, St Ives plc
The cover for your book also needs to be submitted as a PDF file. We print in CMYK -Cyan, Magenta, Yellow and Black- so when submitting your cover file please be sure that it is set to a CMYK colour profile. If you have your colours set to RGB -Red, Green, Blue- then the colours will look different when we then print it in CMYK.
If, for example, you submit a file that has your logo set to RGB and a background image set to CMYK, when we convert the whole file to CMYK, the colours in the logo will look different. We do perform pre-press checks on your submitted files however it is your or your designers responsibility to ensure that the cover is set to the correct colour settings when we receive it. You can either check with your designer or check the document settings on the software that you have used. Before submitting your files for print, you can go through the following check list.
Looking at the design of your front cover, if you have an image that runs to the edge of the cover, then you will need to add a bleed. Where images run to the trim, an allowance needs to be made to account for the tolerances in printing. The image should continue for 3mm outside the trim area to ensure that the image covers the whole of the print area and so that there is no risk of the image not covering the whole area once trimmed. If you don’t want images on the front cover to run over the edge, then you need to ensure that there is at least 4mm between the image or text and the edge of your cover. This is so that when we trim them down the image doesn't sit so close to the edge that we risk trimming it off.
The area outside the trim mark is called the bleed. As previously explained, if you want an image to print to the edge, then the image needs to bleed 3mm outside of the trim mark to account for print tolerances.
The text/image safe area (4mm away from the edge) is the space in which the main body of the text or of an image sit without the risk of being cut off or loosing a section of the image that was intended to be printed.
Once you have a final specification and know the size of your print run, we will provide you with an estimate. The estimate will contain all of the information about your book specification so that you know exactly what we are estimating for, accompanied by the cost of printing the number of units that you wish to print. Our estimate will include delivery to one UK address.
In addition to quoting for the quantity requested we also show a run on price. You may pro-rata this figure to calculate alternative order quantities. For example, if we quote for 500 copies with a 100 run on, the cost of producing 750 copies would be the 500 copy price added to 2.5 x the 100 run on price. The run on price should not be confused with a reprint price.
Once you are ready to print your book you will need to raise a purchase order form with Clays. You will need to fill out the form with all of the specifications and a delivery date. At this stage it is essential that all of the details that you input into the purchase order form are correct. The purchase order form is available in both print and electronic format via our website with details on where to send it.
Payment and Invoicing
We operate on a cash-with-order basis and the books will be printed and distributed once we have received payment. An invoice will be raised once all books have been dispatched acknowledging any previous payment. Please follow the link for payment details.
When Can I Expect Delivery?
Once the purchase order has been processed, the payment has been received, and the data has been through all the pre-press checks for print, your books will be printed and it will take 10-15 working days for your books to reach you, depending on your delivery location.
Depending on where you want the books to be delivered, the order quantity and the type of packaging you have opted for, whether it be in cartons or on a pallet, will depend on what delivery method is right for you. We can deliver on pallets to your front door, but if you are distributing them yourself, it is more manageable to have them delivered in more manageable binders parcels. If you do opt to have them delivered on a pallet then you need to consider road access and how your delivery will be lifted from the vehicle, alongside where you are going to physically store them. We can deliver to multiple addresses but you will need to let us know so that we can process this within the estimate.
Ready to print?
Now that you have read through this information, we hope that you feel more informed about printing your self-published your book. We pride ourselves on our customer service and so even though we have created this guide to give you a better understanding, we understand that it still may not be clear, so please don’t hesitate to contact us. Whether you have a one off question, you need some advice, or you would like a price for printing, we look forward to hearing from you.
If you would like to discuss your project with a member of the team, please contact us on:
0207 902 6228
Alternatively, please send all email enquiries to: